السبت، 23 مارس 2019

شركة رش المبيدات بالرياض

The issue of spraying pesticides is not easy and may not be successful if the basic instructions and rules that we do at the spraying company in Riyadh is not taken, the process of spraying pesticides may be harmful to humans, the environment, and animals if precautions are not taken.

In order to prevent all these mistakes, we at Pesticide Spray Company in Riyadh offer you some of the following scientific advice:

First, in order not to fail to fight diseases and insects, we must be aware in advance of the types of insects, which cause serious damage and which is not dangerous. We also need to know how these insects affect human discomfort.

The most damaging insects are: aphids, yeasi, شركة رش المبيدات worms, mites, grasshoppers, and beetles. Eat leaves and flowers: beetles, grasshoppers, and yarns. So each type of insect has a certain type of insecticide.

Secondly, for spraying, there are several points to note:

The first point is that insecticides are only used if the disease is dangerous.
The second point is that spraying should take place on a sunny, non-windy and unpredictable day of rain.
The third point: When spraying, the pesticide must be delivered to all parts, especially the lower section, and should start spraying from the inside and then spraying pesticides from the outside.
The fourth point: We should not be more than spraying the pesticide to the extent that it starts to run on the leaves.
The fifth point: the process of mixing the necessary amount of pesticide with water and all other instructions are on the tray of the pesticide - we at the company spraying pesticides in Riyadh follow these instructions strictly.
Point 6: We take the necessary precautions against any harm caused by the pesticide. Wearing rubber jumps, a muzzle, and special spray goggles will prevent pesticide damage.
Point 7: We wash the spray tools after the completion of use and close them in a special room so as not to reach the hands of children.
Point 8: We periodically review to verify the effectiveness of the pesticide.
Finally, do not make your hand tied to your neck and do not spread it all the rugs, you become a blame trapped. Rule: Be a wise man.
Pesticide spraying company in Riyadh seeks to be the scientific and global reference to provide the best pesticide spraying services in Riyadh where the workforce and absolute professionalism,

We at Pesticide Spraying Company in Riyadh aim to reduce the number of pests to a safe level less than the level of economic damage and provide food for vital enemies and the occurrence of harmful changes in the ecosystem by using highly specialized pesticides and weak impact in beneficial insects, and using agricultural and biotechnologies that lead to reduce Number of pest communities, taking into account the conservation of natural enemies (predators, parasites, pathogens) and numerical balance between biological enemies and harmful pests.

Our integrated pesticide control program is based on two phases:
In the first stage, the means to reduce the number of pest communities to the levels tolerated by the farms, while maintaining the highest possible crop yield and quality, are selected.This requires the use of pesticides in a sound and integrated manner with other methods to subsequently develop an integrated management model or program.

Phase II: Maintains previous levels and low volatility beyond the critical economic threshold. This requires constant information on the effects of ecosystem change in pest and beneficial insect communities.

Successful factors of integrated control and selected methods We provide benefit in spraying pesticides in Riyadh, where the success of integrated control programs requires full knowledge of the biological and environmental factors key to the agricultural ecosystem, namely:
Biological factors related to harmful species, such as numerical density, reproductive capacity, degree of damage, etc., and availability and usefulness of insects (parasites, predators).

2. Climatic abiotic factors, such as temperature, humidity, lighting and wind.

3. Plant-related factors, such as type, variety and stage of growth, especially agricultural services (pesticides, fertilizers, growth regulators).

Economic factors related to crop value, quality, cost, market requirements, and critical economic limits for control decision.

5. Technical factors related to the provision of experienced and well-trained control specialists, as well as the provision of necessary equipment for scientific and applied processes, such as prediction, sampling, injury counting and enumeration, and the adoption of critical economic limits of the pest, for decision-making.

Al Bait Al Raqi Company is the first in the pesticide spraying services in Riyadh where we have the services of the highest level of professionalism, already our company spraying pesticides in Riyadh strength and professionalism in performance.
Al Bait Al Raqi Company has become one of the experts in this field by providing brands and 
systems solutions, all of which have made our experience the trust of professionals around the world.

الجمعة، 18 يناير 2019

شركة نقل اثاث في الرياض

Moving furniture company in Dammam is a distinct and specialized company offering you all the services of moving furniture for houses, apartments, villas and all the property of the house with ease and as quickly as possible, with the furniture moving company in Dammam you can get the transfer of all the property of your home easily and with the utmost sincerity and honesty, it is through Dealing with furniture moving company in Dammam You can check on all the furniture of the house due to the professionalism of the process of transport and the use of lifting cranes and loading of furniture, with full experience in the process of installation and dismantling of all the property of the house, has emerged the service of moving furniture recently as one of the home services through the company Say furniture in Dammam specializing in شركة تخزين عفش بالرياض the transport process, the customer today travel to any place, which is completely reassuring on the furniture home as a result of the process of transport, storage and installation of home furniture, the service is moving furniture in Dammam taking into account insurance against any damage may befall, and the client to restore the luggage and property From the company moving furniture in Dammam at the time of love and desired or even after returning from travel,  and there are customers who want to make adjustments and repair the house here comes the importance of moving furniture or storage after the jaw in a professional manner and hence comes the role of furniture transfer company in Dammam, Disassembly and installation process Fully stocking and professionalism and honesty possible, as there are customers who need to move home furniture to a new house or dwelling, it is here comes the role of the company Nada for the transfer of furniture in Dammam, since it is one of the best companies specialized in moving home furniture and owning lifting equipment facilitates the process of lifting furniture Dependence on workers and technicians with full experience of disassembly, installation, transport and storage without being exposed to any break or scratch, and taking into account the time and effort of customers, yes with the furniture transfer company in Dammam, the process of moving furniture through dedicated transport vehicles for that and put the furniture in warehouses equipped for that and maintain it againstAny external factors may hit or be exposed to furniture, taking into account the savings on our valued customers in the costs of the process of transport, also has a company Alnadik Furniture Transport Company in Dammam of a high number of other services provided by the relevant and documented transport services, for example, The inventory is as follows:

Dammam Furniture Moving Company

Transportation company in Dammam

Moving services in Dammam

Best furniture moving company in Dammam

The cheapest furniture company in Dammam

Moving companies cheap furniture

Al-Nada Company is one of the most important and best companies specialized in the field of moving furniture and storage in pre-equipped warehouses with full professionalism, and dismantling of furniture and installation and lift and download without any scratch or malfunction in the transport process. For all the properties of your home and all kinds of furniture, whatever sincerity and honesty, just feel free to communicate with the company moving furniture Dammam.

Services of moving furniture company in Dammam

Villas cleaning company in Dammam We offer you many different services that enable you to get a completely clean villa, and it is worth mentioning that you will already be impressed by the results of dealing with cleaning villas in Dammam and this is because the company depends on providing the services that we will mention as follows:

1- A suitable and distinguished number of workers trained to the highest degree of efficiency and training in all cleaning operations

2 - fully rely on various modern appliances that work to clean furniture, floors and various things inside the villa with ease

3 - Selection of active substances in cleaning and not only this, but the selection of scented materials is safe and authorized by the Ministry of Health

4 - Villas cleaning company prices in Dammam very favorable and unbeatable prices with other companies

Villas cleaning company in Dammam offers its services to clean the entire villas from the beginning to the end if you are our dear customer suffers from the existence of any dirt in the villas just rely on us and we do everything necessary to achieve your desire in fully clean villas where is working on cleaning floors villas and cleaning bathrooms and kitchens and sterilized and work The cleaning of various furnishings and facades are cleaned with all kinds of entrances and exits villas

Advantager of Villas Cleaning Company in Dammam

We are a villa cleaning company in Dammam with many features as the company depends in all the different cleaning operations in villas on a set of modern cleaning equipment such as cleaning with fumes and work to provide a lot of high-quality cleaning materials that have the ability to deal with all types of dirt and deal with different stains The company is working to provide a team of technicians who are able to deal with different types of dirt. The prices provided by the company are affordable and affordable and we offer our customers periodic cleaning of villas at distinctive prices.

Our cleaning plan in Dammam Villas Cleaning Company:

Inspect the villa and determine its own space, in order to determine the number of workers that will perform the task.

Choose the equipment that will help the team complete the cleaning task.

Choose the amount of detergent that will be used in cleaning.

Head to the villa at the time specified by the client.

Villas cleaning company is a comprehensive cleaning of the entire villa and remove all the dirt inside, where every room is cleaned inside the villa and remove all the dirt and dust inside it and clean the brushes and all the contents of the room, as well as cleaning the walls and remove any dirt on them even the toughest types of stains and if the walls are severe Dirt walls are painted, and all places and all the contents of the fella are cleaned of bathrooms, kitchens, swimming pools and all the contents of the fella of mattress and antiques and the fella is completely disinfected and given

شركة عزل خزانات بالرياض

Provide sanitary conditions and controls for cleaning and isolation of drinking water tanks where washing and disinfection of drinking water tanks should be considered to prevent diseases caused by contaminated water and to maintain public health.

Some types of insulation cannot be tested, such as:
1- Isolation of foundations.
2 - Isolation of basements surrounded by buildings.
Therefore, care must be taken in the selection of materials and the type of insulation and care supervision of the implementation.

Professionalism is the title of work within the company and the main reliance on superior quality in the processes of isolation of customer افضل شركة تنظيف بيارات بالرياض cabinets in Riyadh We are a tank insulation company
We seek to provide the best tanks insulation services in Riyadh
We have developed reservoir insulation services in Riyadh. Our company is a reservoir insulation company in Riyadh always strives for innovation and strong performance
General conditions and precautions to be taken into account in the implementation of insulation work:

The drawings and project documents should be read well before starting the insulation work.
Take into account that the surface to be isolated shall be a flat surface free of ripples, flicks, disjointed parts, completely dry and moisture free.
Ensure that insulated surfaces are clean before starting the insulation process by:
• Remove dust and impurities.
• Remove the mortar.
• Remove traces of oil and grease.
• Iron rust removal in case of metal surfaces.
• Aramis filled the buildings in the places to be insulated so that these impurities do not affect the adhesion strength between the insulation layer and the original surface to be isolated, which may lead to water leakage under the insulation layers.
Remove the loose parts and nesting of concrete surfaces / buildings to be isolated .. And then leveled with cement mortar until the insulation is implemented on strong surfaces hard so as not to collapse the insulation layer.
Isolate concrete structures / buildings .. whose level is located below the level of the ground on concrete or buildings immediately شركة كشف تسربات المياه بالرياض after the payment of Aramis.
Treatment of cracks, nesting, casting joints, places of riders and all defects surfaces before the implementation of insulation.
Treatment of the points of the interviews of vertical and horizontal surfaces because these points are one of the points of weakness of insulation that can leak water from it and the treatment is as follows:
• Wrap the interviews by the work of a triangle overalls with dimensions of about 80: 100 mm of suitable cement mortar.
• Fasten the confluence of rendering of vertical surfaces with horizontal well.
Test suitable materials for insulation to suit the conditions of origin and the type of water or liquids exposed to insulation.
The protection of the waterproofing layers shall be protected from the weather by providing a protective layer:
• In the case of surfaces: the insulation layer is protected by a plaster over it to protect it from ultraviolet rays that reduce its shelf life.
• In case of wall insulation: the insulation layer is protected .. either by building a wall 2/1 brick in the case of external insulation or concrete wall.
The materials used in insulation shall be of the highest quality and conform to the technical specifications mentioned in the project documents.
Samples of different insulation materials shall be شركة نظافة خزانات بالرياض submitted for approval by the consultant or owner prior to delivery.
 Consider the supply of various materials to the site of the process / project in sufficient quantities necessary to carry out the required work at each stage of the work according to the executive program and in quantities that allow for continuous implementation without disrupting the implementation of other work.
Store the necessary materials in a way that prevents them from being damaged and identified to the weather. Storing the rolls of insulation cloth inside a dry store with continuous ventilation and not exposed to direct sunlight.
For bitumen .. It is supplied in its original packaging and indicated by the type of bitumen and the name of the manufacturer of the company .. The stacking and storage of containers in the proper way and includes not being damaged by the method of storage or exposure to weather factors.
At Al-Bait Al-Raqi Company, we offer tanks insulation services in Riyadh with innovative knowledge through creative engineers who seek to implement the work with full professionalism.
Implementation conditions for insulation under ground water level:

In the implementation of the water and moisture insulation layer of parts of the building located under the basement water level take into account:

Drilling sides shall be at least 30 cm to 60 cm from the wall buildings supporting these parts so that the buildings are as dry as possible for the duration of the work. Also according to the type of material used.
Take into account that the floor (concrete slab) of this building, which will be insulating layer with a level surface free of ripples and mortise and parts
Disassembled and completely dehydrated.
Vertical exterior walls shall be constructed at full height and the structural thickness on which the insulating layers will be applied. Aramis buildings shall be filled to the exterior well with cement mortar and emptying the building arames to the internal surfaces at a depth of 5 mm before the implementation of the cement white layer.
The excavation surrounding the walls of the building shall be kept clean and dry for the duration of the implementation of all insulation and construction works.
Once the insulating layer is finished on the floor and the vertical walls around it, a plaster or wall is made to prevent damage.
It is necessary to keep the site surrounding the buildings in a completely dry state during the period of the implementation of insulating layers and construction works under the level of the site floor. That are approved by the consultant before performing these water works down the insulating layers.
Remove loose parts and nesting from concrete surfaces / buildings to be insulated. They are then leveled with cement mortar until the insulation is carried out on strong hardened surfaces so that the insulation layer does not collapse.
Isolate concrete structures / buildings .. whose level is located below the level of the ground on the concrete or building